3-Way Floorstanding Speaker System
Drive Units
High 1x 33 mm (1,3”) full-cone tweeter
Mid 1x 180 mm (7”) full-cone mid woofer
Low 1x 220 mm (9”) full-cone woofer
Impedance 4 Ohms
Frequency Response 24 Hz - 40 kHz
Sensitivity 89 dB/1W/m
Dimensions H x W x D 118 x 45 x 64 cm (46” x 18” x 25”)
Net Weight ~100 kg (220 lbs)
The Andagio is equipped with a Voxativ fieldcoil driver – nothing else.
No crossover components or electronics of any kind are used inside the cabinet.
The sound of this iconic loudspeaker is optimized purely by the mechanical combination of hand-crafted driver and acoustically tuned cabinet.
A new and innovative amplifier topology is pushing the frequency bandwidth beyond 2MHz while reducing distortion and noise to benchmark setting low levels.
Four 600VA switched mode power supply modules with an impulse power rating of 2100VA each are directly connected to the power amplifier boards for lowest contact resistance and shortest signal path from the power supply to the loudspeaker binding post.
At its inputs the 717 power amplifier features the same innovative input stage as used for the 727 preamplifier.
The 717 can be configured as stereo amplifier, dual mono amplifier or as bridged mono amplifier.
We’re back at the HIGH END 2024, May 9 to 12, 2024! Join us at our usual spot, M,O,C Atrium 4, room F208.
This year, we’re excited to present the new ZELLATON® ULTRA Series.
Experience the Quintessence of Music and innovation firsthand. See you there!
Alieno 150-120 LTD offers the possibility of using the two most famous direct heating tubes 300B and 2A3, to have 150 Watts per channel with the 300B, or 120 Watts/channel with the 2A3.
Besides the power delivered, this power amp also modifies its sonic characteristics in accordance with the kind of tube used.
A dual display on the front panel shows the kind of tube installed, to confirm to the user that Alieno has simply and automatically adjusted all the parameters for the chosen tube without having to make any external modifications or use any tool.
The Wavedream has been our statement for the last 10 years, the foundation of our reputation. It is now time to begin a new chapter, but what can be done to improve a great product?
A mere facelift does not cut it for such a legend. We had to go beyond expectations.
We had to improve the chassis structure and mitigate vibrations.
We had to rethink the internal layout for shorter critical traces and tighter impedance control.
We had to add a touchscreen and update the graphics, to complement the physical remote with mobile control apps.
We had to seamlessly integrate a high-performance network renderer and refine the algorithms that define the sound signature.
We had to redesign the R2R modules for more bits, less distortion and a lower noise floor.
Because when we wrote MK2 on the Wavedream, it had to be special, it had to unveil the soul of a digital source to conserve the analogue physicality of music.
Find out more details and hear it live in Munich High End, room E215 in A 4.2.
